Firmware Loader Page, RS-232Settings | Extron electronic DVS 605

RS-232 Settings

RS-232 Settings

To configure the RS-232 settings:

1.From the Baud Rate drop-down list, select the appropriate baud rate.

2.From the Stop Bits drop-down list, select the number of bits used to indicate a byte.

3.From the Bits drop-down list, select the number of data bits to transmit.

4.From the Parity drop-down list, select the parity checking type.

5.Click Save

Ethernet Settings

NOTE: The default setting is DHCP set to OFF, IP address = 192.168.254.254.

To configure the Ethernet settings for use with DHCP:

1.In the Ethernet Settings section, select the Use DHCP check box.

2.Click Save. Depending on your IT administrator, an IP address is automatically assigned to the device.

To configure the Ethernet settings with a static IP address:

1.In the IP Address field, enter an IP address for the device.

2.In the Subnet Mask field, enter the subnet mask for the device.

3.In the Default Gateway field, enter the default gateway to be used.

4.Click Save.

Firmware Loader Page

This page allows the user to update the device firmware.

Click on this button to open the page.

Figure 49. Firmware Loader Page

DVS 605 • Using the Default Web Pages

85

Image 91

Extron electronic DVS 605 manual Firmware Loader Page, RS-232Settings, Ethernet Settings

Contents

HDCP-CompliantScaler SCALERS AND SIGNAL PROCESSORSwith Seamless Switching User Guide Instructions de sécurité • Français Safety InstructionsSafety Instructions • English Chinese Simplified（简体中文） Copyright FCC Class A NoticeTrademarks Notifications Specifications AvailabilitySoftware Commands Conventions Used in this Guide Using the Default Web Pages ContentsSIS Communication and Control Mounting the DVS DVS 605 Series Description Introduction License Licensed Third-partySoftware Used in the DVSLicensed Third-partySoftware Used in the DVS Package Video Inputs Key FeaturesVideo Outputs General AudioDVS 605 • Introduction DVS 605 • Introduction Controlling the DVS Figure DVS 605 Rear Panel Features — All ModelsRear Panel Connections Rear Panel Cabling DVS using the LockIt bracket as follows Figure 2. LockIt Bracket Mounting Options Audio Input Connector WiringFigure Figure 5. Audio Output Connector Wiring Figure 4. Audio Output Connector WiringFigure 6. RJ-45LAN Connector Wiring DVS 605 • Rear Panel Connections Operation •Front Panel Overview •Powering Up•Other DVS 605 Operating Features Figure 7. DVS 605 Front Panel Features Figure 8. Typical Default Display Cycle Powering UpDefault Display Cycle Menu Navigation Using Front Panel Controls Figure 9. Top Level Menus Menu Overview DVS 605 • Operation Figure 10. Main Menu Figure 12. Picture Control Menu User PresetsFigure 11. User Preset Menu Picture Control Input Input ConfigurationFigure 13. Input Configuration Menu Input video types Resolutions and Refresh Rates Output ConfigurationFigure 14. Output Configuration Menu HDCP Notification Analog Output FormatSync Polarity HDMI Format HDCP Authorized HDCP Status: Inputs & OutputsGenlock/AFL Modes Genlock/AFL Offset Description Audio Delay Setting Audio Configuration All ModelsFigure 17. Audio Configuration Menu Figure 18. Advanced Configuration Menu Advanced ConfigurationAspect Ratio Auto-Image Auto-Imagethreshold settingsAuto Memory OSD duration Switch typeOverscan Test pattern Exit Menu View Comm SettingsFactory Reset Figure 21. Edit Comm Settings Menu Disable Executive Mode Front Panel Lockout Executive ModesFigure 22. Front Panel Lockout Enable Executive Mode DVS 605 Operation Window vs. Image Size Position — An Overview Front Panel Activation Picture-in-picturePIP ModeNOTES Figure 24. Default Main and PIP Window Layouts PIP Presets Screen Save Other DVS 605 Operating FeaturesPower Save Custom EDID/Custom Output Resolution Audio Source Hardwired IR PortThe OSD Bug Audio Format Reset All IP Reset to Factory Defaults Settings Resetting the UnitDVS 605 Reset Mode Summary Figure 25. Reset Mode Comparison Host to Scaler Communications SIS Communication and ControlCopyright Information •Commands and Responses Error Response References Commands and ResponsesPassword Information Error Responses DVS 605 • SIS Communication and Control Symbol Definitions DVS 605 SIS Communication and Control Figure 29. SIS Command EDID Table DVS 605 SIS Communication and Control DVS 605 • SIS Communication and Control DVS 605 • SIS Communication and Control SIS IP command definitions DVS 605 • SIS Communication and Control Response SIS Command and Response TableCommand ASCII Command Horizontal start Additional DescriptionInput name Auto-Image Additional Description CommandASCII Command Response Tint Picture AdjustmentsVideo mute Color Vertical position image Horizontal position windowVertical position window Horizontal position image Output scaler rate Output ConfigurationPower save mode Horizontal size image Command Audio Configuration Audio mute global settingsVolume control audio models only Audio delay available on all models Command Audio input formatAudio output format Audio follow Input preset name Presets User presetsUser preset name Input presets Auto memories per input Advanced ConfigurationTest pattern Freeze HDCP notification green screen/message Video effectEffect duration Front panel security lockout Executive Mode Command Video signal presenceGenlock Genlock/AFL Offset PIP on/off Hardwired IR portReset commands Picture In Picture Command Backup/restore configurationInformation request Product naming ASCII Telnet Ethernet data portFirmware version requests Command ASCII Telnet IP setup commandsInformation requests Command NOTE: E X12!CA Command Directory commandsFile erase commands Re-mapport designations Navigating the Default Web Pages Using the Default Web PagesAccessing the Default Web Pages •Accessing the Default Web Pages To check compatibility view settings Navigating the Default Web PagesTurning Off Compatibility Mode AV input buttons inputs Configuration PagesAV Controls Panel Auto-Imagebutton Video and audio mute buttons Breakaway audio check box audio models onlyFreeze button RGB Scaled Signal typeFigure 34. Input Configuration Panel Input renaming Auto Memory Aspect ratioFilm Detect Auto-Image Refresh rate ResolutionAnalog signal format Figure 35. Input Configuration Panel Test pattern Digital output signal formatSwitch transition Genlock Figure 36. EDID Minder Page EDID Minder Page Figure 37. Assigning EDIDs Assigning EDIDs Signal Sampling Image Settings PageFigure 38. Image Settings Page User Preset User PresetsSettings Included Within Presets Setting Overscan Input Presets Snap PIP to PIP Settings PageFigure 40. PIP Settings Page PIP input selection Horizontal Pos and Vertical Pos fields PIP picture controlsSize and Position Horizontal Size and Vertical Size fields Figure 41. PIP Preset Default Window Locations PIP presets •2-CHDigital •Full Digital Audio Settings PageFigure 42. Audio Config Page None Stereo Dual Mono b.Recall: Size & Position Only Preset Management PageFigure 43. Preset Management Page a.Recall: Inputs, Size & Position, or Figure 44. Device Settings Page Device Settings Page HDCP Notification Screen Saver Settings1.Select the Enable On Screen Display check box On Screen Display Message Auto Switch See Licensed Third-partySoftware Used in the Hardware PagesUnit Information Page Figure 46. Unit Information Page Figure 47. Device Name Page Connection Settings PageFigure 48. Connection Settings Page Device Name Page Figure 49. Firmware Loader Page RS-232SettingsEthernet Settings Firmware Loader Page Figure 50. Executive/Power Mode Page Executive/Power Mode PageExecutive Mode Figure 51. Date and Time Page Power ModeDate and Time Page Mute Video and Sync Figure 52. Password Page Password Page Figure 53. Reset Device Page Reset Device Pagedevice name, DHCP setting, and port mapping UL Guidelines for Rack Mounted Devices Tabletop PlacementMounting Mounting the DVS Figure 55. Furniture Mounting the DVS Rack MountingFurniture Mounting Figure 54. Rack Mounting the DVS Japan Extron WarrantyUSA, Canada, South America and Central America