Password Information
The ] Password: prompt requires a password (administrator level or user level) followed by a carriage return. The prompt is repeated if the correct password is not entered.
If the correct password is entered, the unit responds with ] Login Administrator ] or ] Login User ], depending on password entered. If passwords are the same for both administrator and user, the unit defaults to administrator privileges.
Error Responses
When the DVS 605 receives a valid command, it executes the command and sends a response to the host device. If the unit is unable to execute the command because the command contains invalid parameters, it returns an error response to the host.
Error Numbers
E01 | — Invalid input number | E17 | — Invalid command for signal type |
E06 | — Invalid switch attempt in this mode | E22 | — Busy |
E10 | — Invalid command | E24 | — Privilege violation |
E11 | — Invalid preset number | E25 | — Device not present |
E12 | — Invalid port number | E26 | — Maximum number of |
|
|
| connections exceeded |
E13 | — Invalid parameter | E28 | — Bad filename/file not found |
E14 | — Not valid for this configuration |
|
|
Error Response References
14= Commands that give an E14 (invalid command for this configuration) error if sent to a product whose current configuration does not support the command
24= Commands that give an E24 (privilege violation) error if not logged in at administrator level
28= Commands that may give an E28 (file not found) error
Commands and Responses
Using the Command and Response Tables
The command and response tables for SIS commands from page 42 onwards lists the commands the DVS 605 recognizes as valid. The tables show the responses that are returned to the host with a description of the command function or command execution results. Also included are examples of command in ASCII (Telnet) and URL encoded (web).
NOTE: Upper and lower case text can be used interchangeably.
ASCII to HEX Conversion Table |
Space |
• |
Figure 28. ASCII to Hexadecimal Character Conversion Table
DVS 605 • SIS Communication and Control | 35 |
