Extron electronic DVS 605 manual SIS Command and Response Table, ASCII Command, Input selection

SIS Command and Response Table

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)

Input selection

Video and audio	X!!	In X!•All]
Video	X!&	In X!•RGB]
Audio	X!$	In X!•Aud]
View video input	&	X!]
View audio input	$	X!]
View current input	!	X!]

Select video and audio from input X!. Select video from input source X!. Select audio from input source X!. View current video input X!.

View current audio input X!.

View current selected input X! (video only).

NOTES: See “Video only and Audio only switching (breakaway) Rules“ on page 64 for details

• Audio breakaway ($) is not allowed TO an input configured for any digital audio format.

• Video breakaway (&) is not allowed FROM an input configured for any digital audio format.

• Attempting either of these invalid modes gives an E17 error.

• Audio breakaway is always allowed back TO the current video input.

• When in PIP mode, audio breakaway is not supported. Audio follows either the main window or the PIP window, and is selectable via SIS command.

Input video format

Set video format	X!*X#\	TypX!*X#]
View set format	X!\	X#]
View detected	X!*\	X#]
format
		VTypX!*X#]

Set input X! to format X#.

View set video format of input X!.

View actual video format autodetected on input X!.

Verbose mode response

Input EDID (VGA and HDMI)

Assign EDID to	EAX!*X1(EDID}	EdidAX!*X1(]
input
View assigned EDID	EAX!EDID}	X1(]
data
		EdidAX!*X1(]
Capture an output	ESX@*X1(EDID}	EdidSX@*X1(]
EDID to custom slot
Export EDID file	EEX1(,<filename>	EdidEX1(]
	EDID}
Import EDID file	EIX1(,<filename>	EdidIX1(]
	EDID}

Assign EDID resolution and refresh rate X1( for input X!.

View assigned EDID resolution and refresh rate X1( for input X!.

Verbose mode response

Capture output X@ EDID to X1(

(Valid for X1( = 3, 4, 5, 6, 7 only and X@ = 1 or 2 only.)

Exports EDID table X1( to <filename>.

Imports EDID table X1( from <filename>.

Import valid for X1( = 3, 4, 5, 6, and 7.

NOTE: <filename> can optionally carry a full path name: EDID file format is “bin” carrying 128 or 256 bytes of binary

data.

Exporting a default EDID table (for an X1( value of 10 or greater) results in the “digital” “2CH Digital” table being exported.

NOTE: X! = Input number: 1 through 5
X@ = Output selection: 0 = All outputs (default), 1 = Analog (VGA, YUVp, HDTV), 2 = HDMI, 3 = 3G/HD-SDI, 4 = None
X# = Input video format: 0 = No signal detected, 1 = RGB, 2 = YUV auto, 3 = RGBcvS, 4 = S-video, 5 = Composite,
6 = DVI/HDMI (only available for inputs 3, 4, and 5), 7 = Auto detect (default for inputs 1 and 2)
X1( = Scaler resolution/EDID emulation, 0 = Automatic: match current output resolution (default),1 = Output 1 analog
VGA connector, 2 = Output 2 HDMI connector, 3 = Custom EDID/output rate 1, 4 = Custom EDID/output rate 2,
5 = Custom EDID/output rate 3, 6 = Custom EDID/output rate 4, 7 = Custom EDID/output rate 5.
For variables 10-78, see the SIS EDID table on page 36.
DVS 605 • SIS Communication and Control	42