Command | ASCII Command | Response | Additional Description |
| (host to scaler) | (scaler to host) |
|
|
|
| |
|
|
| |
Advanced Configuration |
|
| |
Test pattern |
|
|
|
Set test pattern | EX2)TEST} | TestX2)] | Set the test pattern to X2). |
View test pattern | ETEST} | X2)] | View the current test pattern. |
|
|
|
|
Freeze |
|
|
|
Freeze all windows | 1F | Frz1] | Freeze Main and PIP input windows. |
Freeze only MAIN | 2F | Frz2] | Freezes Main input window. |
window |
|
|
|
Freeze only PIP | 3F | Frz3] | Freeze PIP input windows. |
window |
|
|
|
Disable | 0F | Frz0] | Unfreeze all windows. |
View | F | X(] | Show the freeze status (1= all frozen, |
|
|
| 2 = Main frozen, 3 = PIP frozen, 0= all |
|
|
| unfrozen). |
|
|
| |
Auto memories (per input) |
|
| |
Enable | EX!*1AMEM} | AmemX!*1] | Set auto memory on. Previous settings for |
|
|
| incoming signal are auto recalled. |
Disable | EX!*0AMEM} | AmemX!*0] | Set auto memory off. Manual recall of |
|
|
| input presets needed to configure input. |
|
|
|
|
View setting | EX!AMEM} | X(] | View current auto memory for input X!. |
|
|
| |
Input aspect ratio (per input) |
|
| |
Enable Fill mode | EX!*1ASPR} | AsprX!*1] | Sets input X! to always fill the entire raster |
|
|
| (default). |
Enable Follow | EX!*2ASPR} | AsprX!*2] | Sets input X! to preserve its native aspect. |
mode |
|
|
|
View aspect setting | EX!ASPR} | X2(] | View aspect ratio setting for input X!. |
|
|
|
|
Auto switch mode |
|
|
|
Disable | E0AUSW} | Ausw0] | Manual switching only (default). |
Priority to highest | E1AUSW} | Ausw1] | Gives priority to the highest numbered |
active |
|
| active input. |
Priority to lowest | E2AUSW} | Ausw2] | Gives priority to the lowest numbered |
active |
|
| active input. |
View setting | EAUSW} | X3&] | View the current auto switch mode. |
|
|
|
|
NOTE: X! = Input selection: 1 to 5 |
|
|
|
|
| |
X( = Enable/disable: 0 = off/disable, 1 = on/enable |
|
|
| |||
X2) = Test patterns: |
|
|
|
|
| |
0 | = off (default) | 4 | = crosshatch | 8 | = ramp | 12 = 1.85 aspect ratio |
1 | = crop | 5 | = 4x4 crosshatch | 9 | = white field | 13 = 2.35 aspect ratio |
2 | = alternating pixels | 6 | = color bars | 10 = 1.33 aspect ratio | 14 = blue mode | |
3 | = alternating lines | 7 | = grayscale | 11 = 1.78 aspect ratio |
| |
X2( = Aspect ratio:
1 = fill; each input rate will automatically fill the entire output raster (default)
2 = follow; each input rate will be displayed with its native aspect ratio
X3& = Auto switch mode: 0 = disable (default), 1 = priority to highest numbered input, 2 = priority to lowest numbered input
DVS 605 • SIS Communication and Control | 51 |
