Audio Format | Audio Source | Analog Input | Digital Inputs | EDID |
|
|
|
|
|
None | Muted | Yes | Yes | No CEA |
|
|
|
|
|
Analog | Yes | Yes | No CEA | |
|
|
|
|
|
Embedded Digital | No | Yes | ||
|
|
|
|
|
Embedded Digital | No | Yes | ||
|
|
|
|
|
Embedded Digital | No | Yes | ||
| (when present), else |
|
|
|
|
|
|
| |
|
|
|
|
|
Embedded Digital | No | Yes | ||
| (when present), else |
|
|
|
|
|
|
| |
|
|
|
|
|
NOTE: If one of the custom EDID slots is in use, the audio format setting will have no |
effect on the emulated EDID table. |
It is important that care should be taken when assigning custom EDID files, as the user can potentially assign an analog (VGA) EDID to a digital (HDMI) input, or vice versa. If an EDID file listing support for the incorrect video format has been assigned, the attached source may not output any video, or unexpected behavior may result.
The OSD Bug
When switching between inputs, the DVS 605 will display a small OSD “bug” in the upper left corner. This bug contains information regarding the detected input rate and format, the HDCP status of the selected input, and an indication of Main vs. PIP inputs. The OSD bug can be disabled by setting the OSD duration to 0.0 seconds via the front panel, the internal web pages, or by SIS commands.
The items displayed are:
•Main vs. PIP
•Detected input rate
•HDCP Lock
Hardwired IR Port
The DVS 605 includes a hardwired IR input, to be used with a hardwired IR output from an Extron MLC, IPL, or similar controller. This port allows for simple, unidirectional control of the DVS 605 from a host controller that has no available
Using the DVS 605 IR driver, available from the Extron website, basic controls include:
•Input Switching
•
•Audio Mute, Video Mute, A/V Mute
•Volume
•PIP On/Off, PIP Swap
•User Presets Recall 1, 2, and 3 (for the selected input)
•PIP Preset Recall 1 – 6 (with or without input)
•Show Informational On Screen Display (OSD)
NOTE: There is no available IR remote for the DVS 605.
DVS 605 • Operation | 32 |
