Command | ASCII Command | Response | Additional Description |
| (host to scaler) | (scaler to host) |
|
Audio input format
NOTES: • Selects between analog |
• Inputs 1 and 2 X4@ can only be set to 0 or 1; attempting to set these inputs to a digital format yields an E14 response. |
• Digital auto modes (4 or 5) detect and use embedded audio when present, or analog audio if digital audio is not detected |
Set to None | EIX!*0AFMT} | AfmtIX!*0] | Mutes all audio for input X!. |
Set to Analog | EIX!*1AFMT} | AfmtIX!*1] | Select analog audio for input X! (default |
|
|
| for inputs 1 and 2). |
Set to 2Ch digital | EIX!*2AFMT} | AfmtIX!*2] |
Set to Full digital | EIX!*3AFMT} | AfmtIX!*3] |
Set to 2Ch digital | EIX!*4AFMT} | AfmtIX!*4] |
auto |
|
|
Set to Full digital | EIX!*5AFMT} | AfmtIX!*5] |
auto |
|
|
View audio type | EIX!AFMT} | X4@] |
Select 2Ch digital audio for input X! (default for inputs 3, 4, and 5).
Select Full digital audio for input X!.
Select auto detect audio for input X! (valid for inputs 3, 4, and 5 only — EDID set to
2Ch).
Select auto detect audio for input X! (valid for inputs 3, 4, and 5 only — EDID set to
Full).
View the audio input type X4@ for input X!.
Audio output format
Set format | EOX3(AFMT} | AfmtOX3(] | Set the fixed and variable audio output |
|
|
| format. |
View format | EOAFMT} | X3(] | View audio output format. |
Audio follow
Set | EX4!AFLW} | AflwX4!] | Select audio source (main versus PIP). |
View | EAFLW} | X4!] | View audio source (main versus PIP). |
NOTE: X! = Input selection: 1 to 5
X3( = Audio output format: 1 = dual mono, 2 = stereo (default)
X4! = Audio source: 0 = Follow Main window, 1 = Follow PIP window, 2 = Toggle source
X4@ = Audio input type: 0 = none, 1 = analog, 2 = 2Ch digital, 3 = Full digital, 4 = 2Ch digital auto, 5 = Full digital auto
See X4@ for full variable description on page 38.
DVS 605 • SIS Communication and Control | 49 |
