Controlling the DVS 605

RS-232 control port — Using serial commands, the DVS 605 can be controlled and configured via the embedded web pages, or integrated into a control system. Extron products use the SIS - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.

Front panel USB configuration port — Enables easy configuration without having to access the rear panel.

Contact closure ports — These can be used for external control of source switching.

Rack-mountable — The DVS 605 has a 1U, full rack width metal enclosure.

LockIt HDMI cable lacing brackets — These brackets are included and are used to secure HDMI cables to the device.

Internal universal power supply — The 100-240 VAC, 50-60 Hz, international power supply provides worldwide power compatibility.

Controlling the DVS 605

All DVS 605 Series units can be controlled using one or more of the following methods:

The front panel controls.

A computer, a touch screen panel, or any other device that can send and receive serial communications through the USB, RS-232 or Ethernet port. The Extron Simple Instruction Set (SIS) is a set of simple keystroke commands that can be used with any such devices.

Embedded web pages provide a web browser-style interface for controlling the scaler from a computer over a LAN network.

Hardwired IR.

Ethernet control via IP Link, enabling the scaler to be controlled and actively monitored over a LAN, WAN, or the Internet.

DVS 605 • Introduction

6

Page 12
Image 12
Extron electronic DVS 605 manual Controlling the DVS