Error Codes
EN |
|
|
|
|
|
|
|
| Erroe Items | Code | Error Beep | Cause | Remedy |
|
|
|
|
|
|
|
|
| Power | E1 | One long beep | Power frequency is other than 50 Hz. | Unplug the power cord plug and check if the power frequency is 50 Hz. |
|
| frequency Error |
| for 2 sec |
|
|
|
| (50/60Hz) |
|
|
| Plug the power cord in 50 Hz power source and see If “E1” appears. If the error |
|
|
|
|
|
| code is displayed again even after the correct power source is provided, contact |
|
|
|
|
|
| the nearest service centre. |
|
|
|
|
|
|
|
|
| Thermistor | E21 | One long beep | Thermistor Sensor which is supposed to | Unplug the power cord and wait for more than 10 seconds. Plug the power cord |
|
| Open Error |
| for 2 sec | sense the temperature of the cavity | again. If the symptom persists, contact the nearest service centre. |
|
|
|
|
| inside does not work properly. |
|
|
|
|
|
| (Thermistor Sensor open) |
|
|
|
|
|
|
|
|
|
| Thermistor | E22 | One long beep | Thermistor Sensor which is supposed to | Unplug the power cord and wait for more than 10 seconds. Plug the power cord |
|
| Short Error |
| for 2 sec | sense the temperature of the cavity | again. If the symptom persists, contact the nearest service centre. |
|
|
|
|
| inside does not work properly. |
|
|
|
|
|
| (Thermistor Sensor short) |
|
|
|
|
|
|
|
|
|
| Temperature of | E3 | One long beep | The oven cavity gets too hot due to | Open the oven door and check if 1) the oven has been operating with no load or |
|
| exhaust air too |
| for 2 sec | excessive operation with no load or small | too small load, 2) the air filter is placed in a wrong position, or 3) any blocking |
|
| High Error |
|
| load, or due to some blocking materials | materials exist around the Air Exhaust. Cool down the oven (for approx. 30 min) |
|
|
|
|
| around the Air Filter or Air Exhaust at the | under the normal temperature. The oven is back to normal when the error code |
|
|
|
|
| back of the oven. | “E3” disappears and “ON” appears again in the display window. |
|
|
|
|
|
| Unplug the power cord, remove the blocking materials around the ventilation |
|
|
|
|
|
| openings, cool down the oven (for approx. 30 min) sufficiently, plug the power |
|
|
|
|
|
| cord in again and check if the error code appears again. |
|
|
|
|
|
| If the symptom persists even when the oven is cooled down sufficiently, contact |
|
|
|
|
|
| the nearest service centre. |
|
|
|
|
|
|
|
|
| E41 | One long beep | The circuitry inside the oven is not | Unplug the power cord and wait for 10 seconds. | |
|
| Error |
| for 2 sec | working correctly. | Plug the power cord in again and check if the error code “E41” appears again. If |
|
|
|
|
|
| the symptom persists, contact the nearest service centre. |
|
|
|
|
|
|
|
|
| E42 | One long beep | The circuitry inside the oven is not | Unplug the power cord and wait for 10 seconds. | |
|
| Error |
| for 2 sec | working correctly. | Plug the power cord in again and check if the error code “E42” appears again. If |
|
|
|
|
|
| the symptom persists, contact the nearest service centre. |
|
|
|
|
|
|
|
8
