Installation Instructions for Stacking |
| Replacement of Lamp |
EN Important
1.Disconnect the power cord from the wall socket before attempting installation.
2.For stacking installation, you must use the “bracket plate” which is enclosed with this unit.
3.The maximum stacking height is two units.
Stacking the two units is limited to the following models.
CAUTION: Be sure the oven cavity is empty.
Installation
1.Stack two units together.
2.Remove 6 screws as shown in the figure.
3.Place the
4.Attach and tighten 6 screws as shown in the figure here.
5.Ensure the top oven is at a safe and workable height.
Important
1.Remove a screw securing the lamp cover.
You don’t need to remove outer panel to replace lamp.
2.Remove the lamp by rotating it clockwise.
3.Replace with a new lamp by rotating it
Lamp Cover
| Lamp Hoder |
| Lamp |
Outer Panel | (230 V 25 W) |
Screw
10