Extron electronic DVS 605 Input renaming, Signal type, Input Configuration Panel, RGB Scaled

Input/Output Configuration Page — Input Configuration Panel

Click on this button to open to this page.

The Input Configuration panel consists of user configurable fields for each of the five inputs. These include; input naming, signal type, aspect ratio, Auto-Image, Auto Memory, HDCP Authorized status, and film detection. There is also a visual indicator on the right side of the panel for the currently active video and audio inputs; for example in the image below input 2 is audio and Lab DVD is a video input.

Figure 34. Input Configuration Panel

Input (renaming)

To rename an input click inside the field and type in the desired name to identify the input. Input names have a 16-character limit. By default, the name associated with an input channel is Input <number>.

NOTE: Entering a single space character resets the name of the input to the default.

Signal type

The user can select the signal type for inputs 1 and 2 from Auto Detect, RGB Scaled, Auto YUV, RGBcvS, S-Video, and Composite. For inputs 3, 4, and 5, HDMI/DVI is the only available signal type.

From the Signal Type drop-down list, select the video format associated with the input.

For inputs 1 and 2, available signal types include:

•Auto-Detect— With this setting selected, whenever the device detects an input format change, it automatically sets the input signal type.

•RGB Scaled

•Auto YUV — With this setting selected, the device detects if YUVi or YUVp/HDTV is applied and sets the input accordingly.

•RGBcvS

•S-Video

•Composite

DVS 605 • Using the Default Web Pages 65