Input Configuration
This menu allows the user to adjust various input configuration settings such as video signal type, film mode, horizontal and vertical start position, horizontal and vertical active pixels, total pixel number, phase, and EDID settings for the selected input. The selected input is shown as (x) on the LCD screen images.
INPUT Next
CONFIG
| Next | |
INPUT #x | ||
| ||
RGB |
|
Rotate either to select input signal type.
(x)FILM MODE |
|
| Next |
| |||
|
|
| |
OFF |
|
|
|
Rotate either to turn film mode off or to Auto.
(x)H START V Next
027 029
Rotate 
to adjust horizontal start position. Rotate 
to adjust vertical start position.
Next
(x)H | ACT V | Next | (x)TPIX | PHAS | Next |
1024* | *0768 |
| 1344* | 01 |
|
| Rotate | to adjust | Rotate | to adjust | |
| horizontal active pixels. | total pixels. | |||
| Rotate | to adjust | Rotate | to adjust | |
| vertical active pixels | phase (* = default). | |||
| (* = default). |
|
|
| |
INx EDID
1600x1200@60
Rotate 
to set EDID resolution for the active input. Rotate 
to set refresh rate.
Figure 13. Input Configuration Menu
NOTE: Only inputs 1 and 2 offer selectable video types.
Input video types
Rotate either the Adjust horizontal ([) or Adjust vertical ({) knob while in any of the Input submenus to select the appropriate video format.
Input 1
Input 1 is a universal analog input for RGB scaled, Auto YUV, RGBcvS,
When input 1 is set to YUV Auto, the scaler detects if YUVi or YUVp/HDTV is applied and sets the input accordingly.
It can also be set to autodetect the incoming input signal type. This is the default setting.
Input 2
Input 2 is a universal analog input for RGB scaled, Auto YUV, RGBcvS,
When input 2 is set to YUV Auto, the scaler detects if YUVi or YUVp/HDTV is applied and sets the input accordingly.
It can also be set to autodetect the incoming input signal type. This is the default setting.
Inputs 3-5
Input 3 through 5 are digital inputs for HDMI or DVI input signals.
DVS 605 • Operation | 17 |
