Extron electronic DVS 605 manual Output Configuration, Resolutions and Refresh Rates

Output Configuration

The output configuration menu allows selection of output resolution and refresh rates, analog output types (RGBHV, RGBS, RGsB and Y, B-Y, R-Y), sync polarity, HDMI format, HDCP notification display, genlock setting, and offset values.

OUTPUT Next

CONFIG

RESOLUTION Next

1365x1024@60

Rotate to select a resolution. Rotate to select a refresh rate.

VGA FORMAT	Next
RGBHV

Rotate either to select VGA format.

H-SYNCV- Next

Rotate either to set sync values.

HDMI FORMAT	Next	HDCP NOTE	Next
AUTO		OFF <ON>
Rotate either to		Rotate either to
set HDMI format.		tun HDCP note
		on or off.

Figure 14. Output Configuration Menu

GENLOCK/AFL Next

OFF

Rotate either to set genlock mode.

H OFFSET V

110 75

Rotate to adjust horizontal offset. Rotate to adjust vertical offset.

Resolutions and Refresh Rates

Rotate the horizontal ([) knob to select a resolution, and the vertical ({) knob for refresh rates. The default resolution and rate is 720p/60 Hz.

There are also 5 custom, user-defined/captured rates available (C1 - C5). When no rate is captured or uploaded to any of the 5 custom memory slots, they default to 720p/60 Hz.

Resolution

23.98 Hz

24 Hz 25 Hz

29.97 Hz 30 Hz

50 Hz

59.94 Hz

60 Hz

75 Hz

Custom 1 through 5				For captured or uploaded EDID tables
640 x 480						X		X	X
800 x 600						X		X	X
852 x 480						X		X	X
1024 x 768						X		X	X
1024 x 852						X		X	X
1024 x 1024						X		X	X
1280 x 768						X		X	X
1280 x 800						X		X	X
1280 x 1024						X		X	X
1360 x 765						X		X	X
1360 x 768						X		X	X
1365 x 768						X		X	X
1366 x 768						X		X	X
1365 x 1024						X		X	X
1440 x 900						X		X	X
1400 x1050						X		X
1600 x 900						X		X
1680 x 1050						X		X
1600 x 1200						X		X
1920x1200						X		X
480p							X	X
576p						X
720p			X	X	X	X	X	X
1080i						X	X	X
1080p	X	X	X	X	X	X	X	X
2k	X	X	X	X	X	X	X	X

DVS 605 • Operation 18