Extron electronic DVS 605 manual Picture Control, User Presets, Settings Included Within Presets

Picture Control

This section shows the image settings for the selected input. These include brightness, contrast, color, tint, and detail, which can be adjusted and applied to that input.

To adjust the picture settings click and drag the associated slider for any image setting (brightness, contrast, color, tint, or detail) to the desired value.

Alternatively, you can enter a value within the field associated with the image setting, or click the up > and down < arrows and change the value in the field.

User Presets

In this section of the Image Settings page, the user can save or recall up to 16 user presets per input channel for the currently active input. The user presets contain only picture control properties.

Settings Included Within Presets

Setting	User Preset	Input Preset	PIP Preset	Auto Memory
H/V Start		Yes		Yes
Active Pixels		Yes		Yes
Active Lines		Yes		Yes
Total Pixels		Yes		Yes
Phase		Yes		Yes
Brightness and Contrast	Yes	Yes		Yes
Color and Tint	Yes	Yes		Yes
Detail	Yes	Yes		Yes
Input Type		Yes
Audio Input Gain		Yes
and Attenuation
Main Image/Window	Yes	Yes	Yes	Yes
Size and Position
PIP Image/Window			Yes
Size and Position
Preset Name	Yes	Yes	Yes
Main Input			Yes*
PIP Input			Yes*
Film Mode		Yes
Presets Available	16 per input	128 global	16 global	32 per input channel
	channel
Recall location	Current input	Any input supporting the	Any input	Automatically recalled
		input type saved in the	except input 5	based on signal
		preset

*PIP presets can be recalled with or without the main and PIP inputs that were active when the preset was saved.

NOTE: “H/V Start” indicates the horizontal and vertical start.

Figure 39. Presets Settings

DVS 605 • Using the Default Web Pages 72