Front Panel Lockout (Executive Modes)

Front Panel Lockout (Executive Modes)

To prevent accidental changes to settings, press the Menu and Next buttons simultaneously for 2 seconds to enable front panel lockout mode (executive mode 2).

The menu system returns to the default menu within 10 seconds.

Executive mode 2 locks all front panel functions except input switching, PIP enable and PIP swap, and Auto-Image. Menu and Next buttons and the Adjust knobs are disabled.

When executive mode 2 is active, all functions and adjustments can still be made through USB, RS-232, or Ethernet control. For details on remote control, see “SIS Communications and Control” starting on page 34.

To disable executive mode 2, press the Menu and Next buttons simultaneously for 2 seconds. See the flowchart below.

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

In

 

RGBHV

 

 

 

 

sec.

In

31.47 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#1

6

40x4

80

 

 

 

 

 

 

#1

59.94 Hz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Output

 

 

 

 

 

 

 

 

 

 

 

7

20p@60

 

 

 

 

Press both for

 

 

Press both for

2 seconds

 

 

 

2 seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu

Next

3 sec.

3 sec.

Menu Next

 

 

 

 

 

 

 

 

 

 

 

 

EXEC. MODE 2

EXEC. MODE 2

timeout

timeout

 

ENABLED

 

 

 

DISABLED

Enable Executive Mode

Disable Executive Mode

Figure 22. Front Panel Lockout

Executive mode 1 locks all front panel functions completely. This mode can be enabled or disabled by SIS commands only.

DVS 605 • Operation

27

Page 33
Image 33
Extron electronic DVS 605 manual Front Panel Lockout Executive Modes, Enable Executive Mode, Disable Executive Mode