Extron electronic DVS 605 Ethernet data port, Firmware version requests, Command, ASCII Telnet

SIS Command and Response Table for IP Control Port

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional Description
	(host to processor)	(host to processor)	(processor to host)

Ethernet data port

Set current connection	E0*X12& TC}	W 0%2A X12& TC	Pti0*X12&]
port timeout
View current connection	E0TC}	W 0TC	X12&]
port timeout
Set global IP port timeout	E1*X12& TC}	W 1%2AX12&TC	Pti1*X12&]
View global IP port	E1TC}	W 1TC	X12&]
timeout
Firmware version requests

NOTE: An asterisk (*) after the version number indicates the version currently running. Caret (^) indicates bad checksum/invalid load. Question marks (?) indicate version not loaded.

Query firmware versionQ or 1QQ or 1QX13!]Show the scaler firmware version number (X13!) to two decimal places. Gives the number of the currently running version of the user-updatable firmware.

DVS 605 • SIS Communication and Control

Query verbose version	0Q	0Q	All responses
information			from 2Q-3Q-4Q]
Example:	1Q	1Q	1.01
Query bootstrap version	2Q	2Q	X13!]
Example:	2Q	2Q	0.06
Query factory firmware	3Q	3Q	X13!(plus web ver.-
version			desc-date/time)]
Example:	3Q	3Q	1.00(1.37-DVS 605
			Series -Fri, 12 Aug
			2012 03:28:10 GMT)

Show bootstrap, factory-installed, and updated firmware versions. (See 2Q, 3Q, and 4Q, below.)

The bootstrap firmware is not user- replaceable but you may need this information for troubleshooting.

Factory-installed firmware is not user replaceable. This firmware is the version the processor reverts to after a mode 1 reset (see “Operation” section).

In this example, the factory firmware version is 1.00, (the kernel version 1.37), for the DVS 605, dated 12 August, 2012.

56

NOTE: X12& = The number of seconds before timeout on the IP connection: (min. = 1; max. = 65000; default = 30 = 300 seconds) X13! = Version number (listed to 2 decimal places)