LISTENING TO EXTERNAL
SOURCES
AUX/MD
tI
I1-
a
CARE AND MAINTENANCE
Occasional care and maintenance of the system and the software are needed to optimize the performance of your system.
To clean the cabinet
Use a soft and dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly moistened with mild detergent solution, Do not use strong solvents, such as alcohol, benzine or thinner as these could damage the finish of the system.
To clean the heads and tape paths
After every 10 hours of use, clean the heads and tape paths with a commercially available head cleaning cassette.
Care of the system
●Do not give the system a strong shock i.e., drop or hit,
●Do not use the system close to a strong magnetic field such as a television. Doing so may cause malfunctions.
Care of CDs
●When a disc becomes dirty, wipe the disc from the center out with a cleaning cloth.
1 Press the AUX/MD button on the remote control repeatedly until corresponding source appears
on the display.
To listen to the equipment connected to the AUX IN jack, display “AUX.”
To listen to the equipment connected to the MD IN jack, display “MD.”
2 Play the corresponding equipment connected.
To change the source name display corresponding to the equipment connected to the AUX IN jack
For the equipment connected to the AUX IN jack, “AUX”is displayed initially. It can be changed to “TVor ‘{VIDEO according to the equipment actually connected to the jacks.
Call up “AUXon the display window and press the POWER button while pressing the * button. Each press on the button changes the display in the following order:
~ AUX ~ VIDEO ~ TV
m
The FUNCTION button on the CD/tape unit cannot be used to select “MD”or “AUX.”Pressing the FUNCTION button only calls up the external source currently selected.
●After playing a disc, store the disc in its case. Do not leave the disc in places that are hot or humid.
m
Care of tapes
●Store tapes in their cases after use.
●Do not leave tapes near magnets, motors, television sets, or any source of magnetism. This will downgrade the sound quality and cause noise.
●Do not expose tapes to direct sunlight, or leave them in a car parked in direct sunlight.
