Aiwa XR-M88 manual Presetting Stations, CLAUQ20, I.-J, Preset Number Tuning, Repeat steps 1 and

PRESETTING STATIONS

I1 1-1- 1

C)LAUQ20 00

t

M

L.. . . ..– &

I.-J

The system can store a total of 32 preset stations. (Each band has a maximum of 20 available preset stations.) When a station is stored, a preset number isassigned to the station. Use the preset number to tune into a preset station directly.

1 Press the TUNER/BAND button on the remote control (or the FUNCTION button on the CD/tape

unit) to select a band. Then, press the + or ➤> button to select a station.

2Press the 11 button to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Preset number

Frequency

3 Repeat steps 1 and 2.

The next station will not be stored if 32 preset stations have already been stored (“FULL’will be displayed).

PRESET NUMBER TUNING

1 Press the TUNER/BAND button on the remote control or the FUNCTION button on the CD/tape unit to select a band.

2 Press the +- button on the CD/tape unit or the E button on the remote control.

Each time the button is pressed, the next ascending preset number is selected.

Tuning by preset number

1Press the TUNER/BAND button on the remote control to select a band. (Or use the FUNCTION button on the CD/tape unit.)

2Press the numbered buttons on the remote control to select a preset number:

Example:

To select preset number 10, press the +10 and O buttons. To select preset number 15, press the +10 and 5 buttons.

To clear a preset station

Select the preset number of the station to be cleared. Then, press the ■ button, and press the II button within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

m

If there is a long period of power failure or disconnection of AC cord, the presetting of the stations is canceled. In this case, preset again.

I o ENGLISH