BEFORE OPERATION
.-
\
USING THE REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and insert two R03 (size AAA) batteries.
.“01 |
... |
/
~
\
| go&4!!!/” | q,Q |
W= | : (AAA) |
FUNCTION “.. /Q;,,./~
POWER 000000000
g
t
Remote rn7;
sensor
!
‘“””’s=LTAPE-POWER
To turn the system on
Press one of the function buttons (TUNER/BAND, AUX/MD, CD, TAPE) on the remote control.
Playback of the corresponding source starts (Direct Play Function).
The POWER button is also available.
To turn the system off
Press the POWER button again.
Using the headphones
COnneCt headphones with a StereO mini plug (03.5 mm, 1/8 inch) to the PHONES jack.
No sound is output from the speakers while the headphones are plugged in.
To use the FUNCTION button on the CD/tape unit
The FUNCTION button on the CD/tape unit substitutes for the function buttons (TUNER/BAND, AUX/MD, CD, TAPE) on the remote control. Each time the FUNCTION button is pressed while power is on, the next function is selected cyclically.
R03 |
Q |
When to replace the batteries
The maximum operational distance between the remote control and the sensor on the CD/tape unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.
Opening and closing the top cover
When to use the remote control
Some operations can be performed using the buttons on the remote control only, while others can be performed using the buttons on the CD/tape unit as well as on the remote control.
This instructions manual clearly describes the buttons available for each operation.
m
●The > button on the remote control has the same function as that of the +> button on the CD/tape unit.
●If the system is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
●The remote control may not operate correctly when:
-The line of sight between the remote control and the remote sensor is exposed to intense light, such as direct sunlight.
-Other remote controls are used nearby (television, etc.)
The number buttons from 1 to 9 also have the functions indicated on the plate above them. To use these functions, press the buttons while pressing the SHIFT button on the remote control.
