Al EDIT RECORDING
u,-
■
●REC
FUNCTION0-9,+10
t
4Press the numbered buttons to designate the tape length.
10 to 99 minutes can be specified.
Example: When using a
In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.
●The + and - buttons are also available to designate the tape length.
ca..ettede.kM
I( | JI | SHIFT | ●REC/ |
| REC MUTE |
The Al edit function enables CD recording without worrying about tape length and track length, When a CD is inserted, the unit automatically calculates track lengths. If necessary, the order of tracks is rearranged so that no track is cut short.
(Al: Artificial Intelligence)
m
Al edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.
1 Load the tape into the cassette deck.
Load the tape with the side to be recorded on first facing upward.
2 Press the CD button on the remote control, or press repeatedly the FUNCTION button on the CD/ tape unit so that “CD” is displayed, and load the disc.
3 Press the CD EDIT button repeatedly while pressing the SHIFT button on the remote control until “EDIT” lights up and “Al” flashes on the display.
5 Press the ● REC button on the CD/tape unit to start recording.
To start recording with the remote control, press the ● REC/ REC MUTE button and within 2 seconds, press the P button. The tape is rewound to the beginning of the side facing upward, the lead segment is played through for 10 seconds, and recording starts. When recording on the side facing upward (side A) ends, recording on the opposite side (side B) starts.
To stop recording
Press the ■ button. Recording and CD play stop simultaneously.
To clear the edit program
Press the ■ button twice so that “EDITdisappears on the display.
To check the order of the programmed track numbers
Before recording, press the CD EDIT button while pressing the SHIFT button on the remote control to select side A or B, and
press the - button repeatedly.
Tape side Program number
Track number Programmed track numbers
Time on cassette tapes and editing time
The actual cassette recording time is usually a little Ionaer than the specified recording time printed on the ‘label.
●Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
●The Al edit function cannot be used with discs containing 31 tracks or more.
16 ENGL/SH
