ES4710BD 10 Slots L2/L3/L4 Chassis Switch
address can be added.
Example: Adding MAC
8.5.1.2.2.6clear port-security dynamic
Command: clear
Function: Clears the Dynamic MAC addresses of the specified port.
Command mode: Admin Mode
Parameters:
Usage Guide: The secure port must be locked before dynamic MAC clearing operation can be performed in a specified port. If no ports and MAC are specified, then all dynamic MAC addresses in all locked secure ports will be cleared; if only a port but no MAC address is specified, then all MAC addresses in the specified port will be cleared.
Example: Deleting all dynamic MAC addresses in port1. Switch#clear
8.5.1.2.2.7switchport port-security maximum
Command: switchport
Function: Sets the maximum number of secure MAC addresses for a port; the “no switchport
Parameters: < value> is the maximum for static secure MAC addresses, the valid range is 1 to 128.
Default: The default number of maximum port secure MAC addresses is 1.
Usage Guide: The MAC address binding function must be enabled before the maximum number of secure MAC addresses can be set. If the secure static MAC address number of the port is larger than the maximum secure MAC address number set, the setting fails; extra secure static MAC addresses must be deleted, so that the secure static MAC address number is no larger than the maximum secure MAC address number for the setting to be successful.
Example: Setting the maximum secure MAC address number for port 1 to 4. Switch(Config)#interface Ethernet 1/1
191
