Operators Manual
allows the operator to delete the current data from the machines memory. Full details relating to this menu and its contents can be found on pages
5.6 Switch 6 - Test Vend
The Test Vend switch (6) allows the operator to vend a drink from the machine to ensure correct operation after cleaning or maintenance.
1. When the switch is pressed and released the LCD will display the screen as shown opposite. Press a drink selection button followed by the START/? button to begin the vend sequence.
2.Ensure that the selection is correct, has not under/overfilled the cup and most importantly, tastes good!
3.Press the X (Exit) key on the drink selection keypad to exit from the Test menu and return to
5.7 Switch 7 - Cup Test
This switch allows the operator to test the operation of the cup drop unit after refilling the cup stacks. When the switch is pressed the cup drop solenoid is operated and a cup is ejected from the cup drop unit. This function ensures that the mechanism is working correctly.
5.8 Switch 8 - Park Head
When this switch is pressed, the dispense head moves to its fully extended position and stops. Press the switch again to return the dispense head to its correct (homed) position.
5.9 Switch 9 - Boiler Fill (Espresso Machines)
When this switch is pressed, the machine pumps a measured amount of water through the system - approximately 400ml, heating it as it does so. This ensures that heated water is immediately available when a drink is selected. This switch should also be used to purge any water left in the system after the machine has been moved or shut down for any length of time.
5.10 Switch 10 - Machine Cool Down (Espresso Machines)
This switch allows an engineer to work safely on the water system and should not be used by the operator.
34
