Evolution Technologies PR10908000 manual DTS Audit List Start ?=Set or Clear All

Operators Manual

The machine is factory set to enable data transfer via the optical DDCMP link. To change this to the DEX setting, press the ↵ (Edit) key to access the menu and the

▲(up) key to select DEX (indicated by the filled radio button. Press the ↵ (Edit) key to save the selection.

N.B. Even if the default is set to DDCMP, once the controller detects a DEX activity, it will automatically switch to the other mode. However, setting the default to the correct protocol will speed up response time.

The operator can now download data from the machine by plugging a DEX enabled device into the DEX port (J36) on the I/O board, located on the rear of the door.

2.DTS Audit List: From this sub-menu the operator can select which data is transferred from the machine to a DEX/DDCMP data

carrier. Scroll down and highlight DTS Audit Data. Press the ↵ (Edit) key to access the menu. The LCD will display the screen as shown.

DTS Audit List

X ID 1

XID 2

XID 3

XID 4

X ID 5

Start (?)=Set or Clear All

All data and events fields within a vending machine are assigned a unique code determined by the Standard. From this sub-menu the operator can choose to allow all fields to be available for download by pressing the START/? key or scrolling through the list and adding an X to the required fields.

3.CA304 Data Type: This sub-menu determines whether the the data will be displayed as currency or numerical, for example, assuming that the value of pound coins in the machine is £3.00, when set to currency CA304 will read 300 in the DEX/DDCMP report. When set to numeric it will read 3.

4.Data Reset Mode: This field can be set to either AUTO or SAVE from within the sub-menu. When set to AUTO, all resettable data will be reset after a successful read.

5.Event Reset Mode: This field can be set to either AUTO or SAVE from within the sub-menu. When set to AUTO, all event data will be reset after a successful read.

6.Printer Baud Rate: This allows the operator to set the correct baud rate for a serial printer if one is to be used. It is important for this to be set correctly to ensure successful data transfer.

4.Backup/Restore: This menu allows the operator to manually backup information stored in the machines memory to the controller board.

52