Evolution Technologies Instant, Freshbrew & Espresso (B2C) Machine, PR10908000 manual

Operators Manual

As the operator presses the final zero, the AM value will appear within a dotted box and the text at the bottom of the LCD will now read ‘Press Arrows To Select’. Press the ▲ (up) or

▼(down) key until PM appears in the box.

Time

hh/ mm / mode: 12 / 24 10 : 30 PM

Press Arrows To Select

Pressing the ↵ (Edit) key will move back to the Clock menu screen and save the new time to the machines memory. Confirm that the status line at the bottom of the screen displays the correct time when Time is highlighted.

N.B. When set to 12 hour format, the program will only allow the operator to set the numbers 0 or 1 in the first field. Once the number 24 has been entered via the ▲ (up) or ▼ (down) keys to indicate 24 hour format, the operator can reset the first two values to reflect 10:30 PM in 24 hour format e.g. 22:30.

3. Daylight Saving: From the Clock menu screen
	Daylight Savings Time
press the ▼ (down) key to highlight the Daylight	North American
Saving menu followed by the ↵ (Edit) key. The	US 2007
LCD will display the screen as shown opposite.	European
	Australian
By default daylight savings time is set to Off. To	Off
choose one of the available options, press the ▲
(up) or ▼ (down) key until selected (indicated by the filled radio button) followed

by the ↵ (Edit) key. Ensure that the required setting is displayed in the status line at the bottom of the screen. Press the X (Exit) key to return to the main menu.

3.DTS: Entry into this menu allows the operator to configure the machine in order to send audit data relating to sales and events stored in the machines memory to a data carrier or other device.

Data Transfer Standard (EVA-DTS) - Overview: The standard makes it possible to transfer information from vending machines/payment systems to PC-based accounting/management systems and/or the opposite way. It is important that all suppliers of vending machines and payment systems agree to a common standard for the Electronic Data Transfer, because only this way the operator can be sure that all his equipment can be read out and programmed by means of the same handheld terminal.

1.DTS Standby Mode: Scroll down and highlight DTS from the System Settings menu. Press the ↵ (Edit) key to access the menu. The LCD will display the screen as shown. The first sub-menu DTS Standby Mode is highlighted with its current state (DDCMP) shown in the bottom line.

DTS

DTS Standby Mode

DTS Audit List

CA304 Data Type

Data Reset Mode

Event Reset Mode

DDCMP

Printer Baud Rate

51