ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Information display shows the VLAN allocation result:

9.5.1.3Port type configuration

Click “Vlan configuration”, “Vlan configuration”, ”Port type configuration” to open port type configuration list.

9.5.1.3.1Set port mode(trunk/access)

Click “Vlan configuration”, “Vlan configuration”, “Port type configuration”, “Set port mode” (Trunk/Access) to set up port mode of the switch:

zPort: specified port

zType: port mode including access mode and trunk mode. Equals to CLI command 9.2.2.5

zVlan ingress rules: sets up open and close VLAN filter mode. Equals to CLI command 9.2.2.8

Example: Select Ethernet port 1/1, select port mode as Trunk and select Enable Vlan ingress rules and click the Apply button to apply this setting to the switch.

Port mode configuration to show port mode information

219

Page 220
Image 220
Accton Technology ES4710BD manual Port type configuration, Set port modetrunk/access