|
| ES4710BD 10 Slots L2/L3/L4 Chassis Switch | |
|
|
|
|
Command |
|
| Explanation |
Port Mode |
|
|
|
p2p |
| ||
| Sets the port link type | ||
no |
|
| |
|
| Sets/Cancels setting for the port to be an | |
no |
| edge port |
10.2.2Introduction to MSTP configuration commands
10.2.2.1abort
Command: abort
Function: Discards the configuration in MSTP field and exits from MST mode to Global Mode.
Command mode: MSTP Field Mode.
Usage Guide: When using this command to exit MST mode, the configuration made to the MSTP field won't take effect and the previously saved MSTP field configuration remains effective. The "Ctrl+z” command is the keyboard equivalent to the "abort" command, i.e., exit without saving configuration changes.
Example: exiting MST mode without save the configuration changes.
Switch(Config)#
10.2.2.2exit
Command: exit
Function: Saves the configuration to MSTP field and exits from MSTP mode to Global Mode.
Command mode: MSTP Field Mode.
Usage Guide: when using this command exiting MST mode, changes made to MSTP field are applied at the same time.
Example: exiting MST mode and apply the configuration changes.
Switch(Config)#
10.2.2.3instance vlan
Command: instance
no instance <instance-id> [vlan <vlan-list>]
Function: creates an Instance and configures
Parameters:
Command mode: MSTP Field Mode.
Default: Before creating any instance, the switch has only Instance 0 and VLAN1 – 4094 all belong
229