Nortel Networks 214393-A manual Ethernet Errors tab for graphing ports, Field, Description

88Chapter 3 Configuring and graphing ports

Table 33 Port Interface tab fields for multiple ports (continued)

Field	Description
InErrors	For packet-oriented interfaces, the number of inbound packets that
	contained errors preventing them from being deliverable to a
	higher-layer protocol. For character-oriented or fixed-length
	interfaces, the number of inbound transmission units that
	contained errors preventing them from being deliverable to a
	higher-layer protocol.
OutErrors	For packet-oriented interfaces, the number of outbound packets
	that could not be transmitted because of errors. For
	character-oriented or fixed-length interfaces, the number of
	outbound transmission units that could not be transmitted because
	of errors.
InUnknownProtos	For packet-oriented interfaces, the number of packets received via
	the interface that were discarded because of an unknown or
	unsupported protocol. For character-oriented or fixed-length
	interfaces that support protocol multiplexing, the number of
	transmission units received via the interface that were discarded
	because of an unknown or unsupported protocol. For any interface
	that does not support protocol multiplexing, this counter will always
	be 0.

Ethernet Errors tab for graphing ports

The port Ethernet Errors tab shows port Ethernet Errors statistics.

To open the Ethernet Errors tab for graphing:

1Select the port or ports you want to graph.

To select multiple ports, [Ctrl] + left-click the ports that you want to configure. A yellow outline appears around the selected ports.

214393-A