Nortel Networks 214393-A manual Security, Insert AuthConfig dialog box

Chapter 9 Security parameters 151

Table 57 describes the AuthConfig tab fields.

Table 57 AuthConfig tab fields

Field	Description
BrdIndx	Index of the slot containing the board on where the port is located.
	This value is meaningful only if SecureList value is zero. For other
	SecureList values, this parameter should have the value of zero.
PortIndx	Index of the port on the board. This value is meaningful only if
	SecureList value is zero. For other SecureList values, this
	parameter should have the value of zero.
MACIndx	An index of MAC addresses that are either designated as
	allowed (station) or not-allowed(station).
AccessCtrlType	Displays whether the node entry is node allowed or node
	blocked. A MAC address may be allowed on multiple ports.
SecureList	The index of the security list. This value is meaningful only if
	BrdIndx and PortIndx values are set to zero. For other board and
	port index values, it should also have the value of zero.
	The corresponding MAC Address of this entry is allowed or
	blocked on all ports of that this port list.

Security, Insert AuthConfig dialog box

Security, Insert AuthConfig dialog box has editable fields for the AuthConfig tab. Each row in this dialog box has information that can be updated or changed.

To view the Security, Insert AuthConfig dialog box:

1From the Device Manager menu bar, select Edit > Security.

The Security window opens with the General tab displayed (Figure 74 on page 146).

2Click the AuthConfig tab.

The AuthConfig tab opens (Figure 77 on page 150).

3Click inside a row.

4Click Insert.

The Security, Insert AuthConfig dialog box opens (Figure 78).

Reference for the BayStack 380-24F Gigabit Switch Management Software