Nortel Networks 214393-A Security parameters, General tab items continued, Items, Description

		Chapter 9 Security parameters 147
Table 54 General tab items (continued)
Items	Description
SecurityAction	Actions performed by the software when a violation occurs
	(when SecurityStatus is enabled). The security action
	specified here applies to all ports of the switch.
	A blocked address causes the port to be partitioned when
	unauthorized access is attempted. Selections include:
	• noAction: Port does not have any security assigned to it,
		or the security feature is turned off.
	•	trap: Listed trap.
	• partitionPort: Port is partitioned.
	• partitionPortAndsendTrap: Port is partitioned and traps are
		sent to the trap receiver.
	• daFiltering: Port filters out the frames where the
		destination address field is the MAC address of
		unauthorized Station.
	• daFilteringAndsendTrap: Port filters out the frames where
		the desitnation address field is the MAC address of
		unauthorized station. Traps are sent to trap receiver(s).
	• partitionPortAnddaFiltering: Port is partitioned and will
		filter out the frames with the destination address field is the
		MAC address of unauthorized station.
	•	partitionPortdaFilteringAndsendTrap: Port is
		partitioned and will filter out the frames with the destination
		address field is the MAC address of unauthorized station.
		Traps are sent to trap receiver(s).
	Note: “da” means destination address.
CurrNodesAllowed	Current number of entries of the nodes allowed in the
	AuthConfig tab.
MaxNodesAllowed	Maximum number of entries of the nodes allowed in the
	AuthConfig tab.
PortLearnStatus	Set of ports where auto-learning is enabled.
CurrSecurityLists	Current number of entries of the Security listed in the
	SecurityList tab
MaxSecurityLists	Maximum entries of the Security listed in the SecurityList tab.

Reference for the BayStack 380-24F Gigabit Switch Management Software