Nortel Networks 214393-A manual Configuring and graphing the switch, System tab items continued

	Chapter 2 Configuring and graphing the switch 51
Table 16 System tab items (continued)
Item	Description
AuthenticationTraps	Click enable or disable. When you select enabled, SNMP
	traps are sent to trap receivers for all SNMP access
	authentication. When you select disabled, no traps are
	received.
	To view traps, click the Trap toolbar button.
NextBootMgmtProtocol	The transport protocol(s) to use after the next boot of the
	agent.
CurrentMgmtProtocol	The current transport protocol(s) that the agent supports.
BootMode	The source from which to load the initial protocol
	configuration information to boot the switch the next time,
	local (from the switch), or net (over the network), or none.
ImageLoadMode	The source from which to load the agent image at the next
	boot.
CurrentImageVersion	The version number of the agent image that is currently
	used on the switch.
LocalStorageImageVersion	The version number of the agent image that is stored in
	flash memory on the switch.
NextBootDefaultGateway	The IP address of the default gateway for the agent to use
	after the next time the switch is booted.
CurrentDefaultGateway	The IP address of the default gateway that is currently in
	use.
NextBootLoadProtocol	The transport protocol to be used by the agent to load the
	configuration information and the image at the next boot.
LastLoadProtocol	The transport protocol last used to load the image and
	configuration information on the switch.
Reboot	Action object to reboot the agent.
	Reset — initiates a hardware reset.
	The agent does best efforts to return a response before the
	action occurs. If any of the combined download actions are
	requested, neither action occurs until the expiration of
	s5AgInfoScheduleBootTime, if set.

Reference for the BayStack 380-24F Gigabit Switch Management Software