Nortel Networks 214393-A 22Chapter 1 Device Manager basics, Properties dialog box items, Area

22Chapter 1 Device Manager basics

Table 1 Properties dialog box items

Area	Item	Description
Polling	Status Interval	Interval at which status information is gathered (default is 20
		seconds).
	(If Traps, Status	Interval at which statistics and status information are gathered
	Interval: )	when traps are enabled. The default is 60.
	Hotswap Poll Interval	The interval at which Device Manager polls for module
		information. The default is 1 interval.
	Enable	Enables (true) or disables (false) periodic polling of the device
		for updated status. If polling is disabled, the chassis status is
		updated only when you click Refresh on the Chassis tab.
SNMP	Retry Count	Number of times Device Manager sends the same polling
		request if a response is not returned to Device Manager.
		You may want to set this field to three or four.
	Timeout	Length of each retry of each polling waiting period. When you
		access the device through a slow link, you may want to increase
		the timeout interval and then change the Retransmission
		Strategy to superlinear.
	Trace	The trace field is used to enable and disable SNMP tracing.
		When Trace is selected, SNMP protocol data units (PDUs) are
		displayed in the Device > Log dialog box.
	Register for Traps	When selected (enabled), automatically registers to received
		traps when Device Manager is launched against a device.
	Listen for Traps	When selected (enabled), Device manager listens for traps from
		the device
	Max Traps in Log	The specified number of traps that may exist in the trap log. The
		default is 500.
	Trap Port	Specifies the UDP port that Device Manager will listen on to
		receive SNMP traps.
	Listen for Syslogs	This feature is inactive and not available.
	Confirm row deletion	A dialog box displays when checked, before deleting a row.

214393-A