Nortel Networks 214393-A Rmon, History tab fields, RMONControl, Insert History dialog box, Field

	Chapter 8 RMON 127
Table 48 History tab fields
Field	Description
Index	A unique value assigned to each interface. An index identifies an
	entry in a table.
Port	Any Ethernet interface on the device.
BucketsRequested	The requested number of discrete time intervals over which data is
	to be saved in the part of the media-specific table associated with
	this entry.
BucketsGranted	The number of discrete sampling intervals over which data is saved
	in the part of the media-specific table associated with this entry.
	There are instances when the actual number of buckets associated
	with this entry is less than the value of this object. In this case, at the
	end of each sampling interval, a new bucket is added to the
	media-specific table.
Interval	The interval in seconds over which the data is sampled for each
	bucket in the part of the media-specific table associated with this
	entry. You can set this interval to any number of seconds between
	1 and 3600 (1 hour). Because the counters in a bucket may overflow
	at their maximum value with no indication, note the possibility of
	overflow in any of the associated counters. It is important to consider
	the minimum time in which any counter could overflow on a
	particular media type and set the historyControlInterval object to a
	value less than this interval. This is typically most important for the
	'octets' counter in any media-specific table. For example, on an
	Ethernet network, the etherHistoryOctets counter could overflow in
	about one hour at the Ethernet's maximum utilization.
Owner	The network management system that created this entry.

2Select an index and then click Insert.

The RMONControl, Insert History dialog box opens (Figure 61).

Figure 61 RMONControl, Insert History dialog box

Reference for the BayStack 380-24F Gigabit Switch Management Software