Nortel Networks 214393-A manual Configuring and graphing ports, VLAN tab for multiple ports, Field

Chapter 3 Configuring and graphing ports 85

2Do one of the following:

•From the shortcut menu, choose Edit.

•From the Device Manager main menu, choose Edit > Port.

•On the toolbar, click Edit.

The Port dialog box for a multiple port (Figure 35 on page 76) opens with the Interface tab displayed.

3Click the VLAN tab.

The VLAN tab opens (Figure 39).

Figure 39 VLAN tab for multiple ports

Table 32 describes the VLAN tab fields for multiple ports.

Table 32 VLAN tab fields for multiple ports

Field	Description
Type	Indicates the type of VLAN port (Trunk or Access port). If the
	port is a trunk port, the port is probably a member of more than
	one VLAN. If the port is an access port, the port can only be a
	member of one VLAN if there is no membership conflict.
VlanIds	The VLANIDs of which this port is a member.
DiscardUntaggedFrames	This field only applies to trunk ports. It acts as a flag used to
	determine how to process untagged frames received on this
	port. When the flag is set, the frames are discarded by the
	forwarding process. When the flag is reset, the frames are
	assigned to the VLAN specified by rcVlanPortDefaultVlanId.
DefaultVlanId	The VLAN ID assigned to untagged frames received on a
	trunk port.

Reference for the BayStack 380-24F Gigabit Switch Management Software