HP Manager Software Displays the configured Snmp community strings, Syntax display snmp community

186CHAPTER 6: IP SERVICES COMMANDS

display snmp	Displays the configured SNMP community strings.
community	Syntax — display snmp community
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 4.0.
	Examples — To display the configured SNMP community strings, use the
	following command:
	WX-1200#display snmp community
	Communities:
	"wireless_switch", access=read-write-notify, notify target
	use cnt=0
	Table 39 describes the fields in this display.
	Table 39 Outpot for display snmp community

Field	Description
Community string	Community string.
access	Access settings for the string:
	„ notify-only—An SNMP management application
	using the string can receive notifications from the
	switch, but cannot get or set object values.
	„ notify-read-write—An SNMP management
	application using the string can get and set object
	values on the switch. The application can also
	receive notifications from the switch.
	„ read-notify—An SNMP management application
	using the string can get object values on the switch
	but cannot set them. The application can also
	receive notifications from the switch.
	„ read-only—An SNMP management application
	using the string can get (read) object values on the
	switch but cannot set (write) them.
	„ read-write—An SNMP management application
	using the string can get and set object values on the
	switch.
notify target use cnt	Number of times this community is specified in a
	notification target entry.