HP Manager Software manual Preference, Clear port name Removes the name assigned to a port

64CHAPTER 4: PORT COMMANDS

clear port name Removes the name assigned to a port.

Syntax — clear port port-listname

„port-list— List of physical ports. MSS removes the names from all the specified ports.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Examples — The following command clears the names of ports 1 through 3:

WX4400# clear port 1-3 name

See Also

„display port status on page 70

„set port name on page 82

clear port	Resets a gigabit Ethernet port on a WX4400 to use the GBIC (fiber)
preference	interface for the active link.

Syntax — clear port preference port-list

„port-list— List of physical ports. MSS clears the preference on all the specified ports.

Defaults — When both the copper and fiber interfaces of a gigabit

Ethernet port are connected, the GBIC (fiber) interface is the active link.

The RJ-45 (copper) link is unused.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — This command applies only to the WX4400. This command does not affect a link that is already active on the port.