HP Manager Software manual See Also „ display crypto ca-certificateon

crypto certificate 449

To use this command, you must already have obtained a copy of the certificate authority’s certificate as a PKCS #7 object file. Then do the following:

1Open the PKCS #7 object file with an ASCII text editor such as Notepad or vi.

2Enter the crypto ca-certificatecommand on the CLI command line.

3When MSS prompts you for the PEM-formatted certificate, paste the PKCS #7 object file onto the command line.

Examples — The following command adds the certificate authority’s certificate to WX certificate and key storage:

WX4400# crypto ca-certificate admin Enter PEM-encoded certificate

-----BEGIN CERTIFICATE-----

MIIDwDCCA2qgAwIBAgIQL2jvuu4PO5FAQCyewU3ojANBgkqhkiG9wOBAQUFADCB

mzerMClaweVQQTTooewi\wpoer0QWNFNkj90044mbdrl1277SWQ8G7DiwYUtrqoQplKJvxz

.....

Lm8wmVYxP56M;CUAm908C2foYgOY40=

-----END CERTIFICATE-----

See Also

„display crypto ca-certificateon page 459

crypto certificate Installs one of the WX switch’s PKCS #7 certificates into the certificate and key storage area on the WX switch. The certificate, which is issued and signed by a certificate authority, authenticates the WX switch either to 3WXM or Web Manager, or to 802.1X supplicants (clients).

Syntax — crypto certificate {admin eap webaaa }

PEM-formatted certificate

„admin — Stores the certificate authority’s administrative certificate, which authenticates the WX switch to 3WXM or Web Manager.

„eap — Stores the certificate authority’s Extensible Authentication Protocol (EAP) certificate, which authenticates the WX switch to 802.1X supplicants (clients).

„webaaa — Stores the certificate authority’s WebAAA certificate, which authenticates the WX to clients who use WebAAA.