HP Manager Software manual History, Set auto-config, Syntax history, „ clear history on

46CHAPTER 3: SYSTEM SERVICE COMMANDS

history	Displays the command history buffer for the current CLI session.
	Syntax — history
	Defaults — None.
	Access — All.
	History — Introduced in MSS Version 3.0.
	Examples — To show the history of your session, type the following
	command:
	WX4400> history
	Show History (most recent first)
	--------------------------------
	[00] display config
	[01] display version
	[02] enable
	See Also
	„ clear history on page 38
set auto-config	Enables a WX switch to contact a 3Com Wireless Switch Manager server
	for its configuration.
	Syntax — set auto-config {enable disable}
	„ enable — Enables the switch to contact a 3Com Wireless Switch
	Manager server to request a configuration.
	„ disable — Disables the auto-config option.
	Defaults — The auto-config option is automatically enabled on an
	unconfigured WXR100 when the Fn switch is pressed during power on.
	However, auto-config is disabled by default on other models.
	Access — Enabled.
	History — Introduced in MSS Version 4.0.