HP Manager Software „ change on „ create on „ delete on „ next on, Output of display command

600CHAPTER 22: BOOT PROMPT COMMANDS

DEVICE: boot1:

FILENAME: default

FLAGS: 00000000

OPTIONS: run=nos;boot=0

Table 111 describes the fields in the display.

Table 111 Output of display command

Field	Description
BOOT Index	Boot profile slot, which can be a number from 0 to 3.
BOOT TYPE	Boot type:
	„ c — Compact flash. Boots using nonvolatile storage or a
	flash card.
	„ n — Network. Boots using a TFTP server.
DEVICE	Location of the system image file:
	„ c: — Nonvolatile storage area containing boot partition 0
	„ d: — Nonvolatile storage area containing boot partition 1
	„ e: — Primary partition of the flash card in the flash card
	slot
	„ f: — Secondary partition of the flash card in the flash
	card slot
	„ boot0 — boot partition 0
	„ boot1 — boot partition 1
FILENAME	System image file name.
FLAGS	Number representing the bit settings of boot flags to pass to
	the booted system image.
OPTIONS	String up to 128 bytes of boot options to pass to the booted
	system image.

See Also

„change on page 595

„create on page 596

„delete on page 597

„next on page 603