HP Manager Software manual Syntax set dap auto mode enable disable

308CHAPTER 9: MANAGED ACCESS POINT COMMANDS

set dap auto mode Enables an WX switch’s template for automatic Distributed MAP configuration.

Syntax — set dap auto mode {enable disable}

„enable — Enables the MAP configuration template.

„disable — Disables the MAP configuration template.

Defaults — The MAP configuration template is disabled by default.

Access — Enabled.

History —Introduced in MSS 4.0.

Usage — You must use the set dap auto command to create the template before you can enable it.

Examples — The following command enables the template for automatic Distributed MAP configuration:

WX1200# set dap auto mode enable success: change accepted.

See Also

„set dap auto on page 306

„set dap auto radiotype on page 309

„set {ap dap} bias on page 310

„set {ap dap} blink on page 311

„set {ap dap} group on page 313

„set {ap dap} radio auto-tunemax-poweron page 317

„set {ap dap} radio auto-tune max- retransmissions on page 318

„set {ap dap} radio auto-tunemin-client-rateon page 321

„set {ap dap} radio mode on page 323

„set {ap dap} radio radio-profileon page 324

„set {ap dap} upgrade-firmwareon page 328