HP Manager Software manual See Also „ clear snmp usm on „ display snmp usm on

194CHAPTER 6: IP SERVICES COMMANDS

Table 42 Output for display snmp usm (continued)

Field	Description
access	Access settings for the string:
	„ read-only—An SNMP management application
		using the string can get (read) object values on the
		switch but cannot set (write) them.
	„ read-notify—An SNMP management application
		using the string can get object values on the switch
		but cannot set them. The switch can use the string
		to send notifications.
	„ notify-only—The switch can use the string to send
		notifications.
	„ read-write—An SNMP management application
		using the string can get and set object values on the
		switch.
	„ notify-read-write—An SNMP management
		application using the string can get and set object
		values on the switch. The switch can use the string
		to send notifications.
auth	Authentication type:
	„	md5
	„	sha
	„	none
encrypt	Encryption (privacy) setting:
	„	des
	„	3des
	„	aes
	„	none
notify target use cnt	Number of times this community is specified in a
	notification target entry.

See Also

„clear snmp usm on page 122

„display snmp usm on page 193