HP Manager Software manual Authentication dot1X command

490CHAPTER 15: 802.1X MANAGEMENT COMMANDS

set dot1x	Determines the 802.1X authentication behavior on individual wired
port-control	authentication ports or groups of ports.
	Syntax — set dot1x port-control
	{forceauth forceunauth auto} port-list
	„ forceauth — Forces the specified wired authentication port(s) to
	unconditionally authorize all 802.1X authentication attempts, with an
	EAP success message.
	„ forceunauth — Forces the specified wired authentication port(s) to
	unconditionally reject all 802.1X authentication attempts with an EAP
	failure message.
	„ auto — Allows the specified wired authentication ports to process
	802.1X authentication normally as determined for the user by the set
	authentication dot1X command.
	„ port-list— One or more wired authentication ports for which to
	set 802.1X port control.
	Defaults — By default, wired authentication ports are set to auto.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command affects only wired authentication ports.
	Examples — The following command forces port 1 to unconditionally
	accept all 802.1X authentication attempts:
	WX4400# set dot1x port-control forceauth 1
	success: authcontrol for 1 is set to FORCE-AUTH.

See Also

„display port status on page 70

„display dot1x on page 483