HP Manager Software Radiotype, Template, „ Radio type „ 11a-802.11a „ 11b-802.11b „ 11g-802.11g

set dap auto radiotype 309

set dap auto	Sets the radio type for single-MAP radios that use the MAP configuration
radiotype	template.
	Syntax — set dap auto [radiotype {11a 11b 11g}]

radiotype {11a 11b 11g

„Radio type:

„11a—802.11a

„11b—802.11b

„11g—802.11g

This option applies only to single-radio models. The value 11g does not apply to model MAP-101.

Defaults — The default radio type for model MAP-101 is 802.11b. The default radio type for model AP2750, MAP-241, and MAP-341, and for the 802.11b/g radios in models AP3750, AP8750, MAP-52, MAP-252, MAP-262, MAP-352, and MAP-372 is 802.11g in regulatory domains that support 802.11g, or 802.11b in regulatory domains that do not support 802.11g.

MAP radios configured for 802.11g also allow associations from 802.11b clients by default. To disable support for 802.11b associations, use the set radio-profile11g-onlycommand on the radio profile that contains the radio.

Examples — The following command sets the radio type to 802.11b:

WX12000# set dap auto radiotype 11b success: change accepted.

See Also

„set dap auto on page 306