HP Manager Software manual Syntax display Defaults None

display 599

Internal Compact Flash Directory (Secondary):

	WXA30001.Rel		8862885 bytes
	See Also
	„ fver on page 601
	„ version on page 606
display	Displays the currently active boot profile. A boot profile is a set of
	parameters that a WX switch uses to control the boot process. Each boot
	profile contains the following parameters:
	„ Boot type — Either compact flash (local device on the WX switch) or
	network (TFTP)
	„ Boot device — Location of the system image file
	„ Filename — System image file
	„ Flags — Number representing the bit settings of boot flags to pass to
	the booted system image.
	„ Options — String up to 128 bytes of boot options to pass to the
	booted system image
	A WX switch can have up to four boot profiles, numbered 0 through 3.
	Only one boot profile can be active at a time. You can create, change,
	and delete boot profiles. You also can activate another boot profile in
	place of the currently active one.
	Syntax — display
	Defaults — None.
	Access — Boot prompt.
	History —Introduced in MSS Version 3.0.
	Examples — To display the currently active boot profile, type the
	following command at the boot prompt:
	boot> display
	BOOT Index:	0
	BOOT TYPE:	c