HP Manager Software Usage, Syntax, Access, History, Defaults, acl-name, hit-sample-rate, display security acl info, display security acl hits

hit-sample-rate 437

Table 81 Output of display security acl resource-usage (continued)

Field	Description
In mapping	Application of security ACLs to incoming traffic on the WX
	switch:
	„ True — Security ACLs are mapped to incoming traffic.
	„ False — No security ACLs are mapped to incoming
	traffic.
No VLAN or PORT	Application of security ACLs to WX VLANs or ports on the
mapping	WX switch:
	„ True — No security ACLs are mapped to VLANs or ports.
	„ False — Security ACLs are mapped to VLANs or ports.
No VPORT mapping	Application of security ACLs to WX virtual ports on the WX
	switch:
	„ True — No security ACLs are mapped to virtual ports.
	„ False — Security ACLs are mapped to virtual ports.

hit-sample-rate	Specifies the time interval, in seconds, at which the packet counter for
	each security ACL is sampled for display. The counter counts the number
	of packets filtered by the security ACL — or “hits.”

Syntax — hit-sample-rate seconds

„seconds — Number of seconds between samples. A sample rate of 0 (zero) disables the sample process.

Defaults — By default, the hits are not sampled.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — To view counter results for a particular ACL, use the display security acl info acl-namecommand. To view the hits for all security ACLs, use the display security acl hits command.