HP Manager Software You can view event messages archived in the buffer, Log buffer facility ?

display log buffer 583

„ severity severity-level— Displays messages at a severity level greater than or equal to the level specified. Specify one of the following:

„ emergency — The WX switch is unusable.

„ alert — Action must be taken immediately.

„ critical — You must resolve the critical conditions. If the conditions are not resolved, the WX can reboot or shut down.

„ error — The WX is missing data or is unable to form a connection. „ warning — A possible problem exists.

„ notice — Events that potentially can cause system problems have occurred. These are logged for diagnostic purposes. No action is required.

„ info — Informational messages only. No problem exists. „ debug — Output from debugging.

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — The debug level produces a lot of messages, many of which can appear to be somewhat cryptic. Debug messages are used primarily by 3Com for troubleshooting and are not intended for administrator use.

	Examples — Type the following command to see the facilities for which
	you can view event messages archived in the buffer:
WX4400# display	log buffer facility ?
<facility name>	Select one of: KERNEL, AAA, SYSLOGD, ACL, APM, ARP,
ASO, BOOT, CLI,	CLUSTER, COPP, CRYPTO, DOT1X, ENCAP, ETHERNET, GATEWAY, HTTPD,
IGMP, IP, MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM, ROGUE, SM, SNMPD, SPAN, STORE,
SYS, TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP, TLS, TUNNEL, VLAN, X509, XML, MAP,
RAPDA, WEBVIEW,	EAP, PORTCONFIG, FP.

The following command displays logged messages for the AAA facility:

WX4400# display log buffer facility AAA

AAAJun. 25 09:11:32.579848 ERROR AAA_NOTIFY_ERR: AAA got SM special event (98) on locality 3950 which is gone