HP Manager Software Usage, Access, History, Defaults, Examples, clear ap radio

clear {ap dap} radio 273

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

„radio all — All radios on the MAP.

Defaults — The clear ap radio command resets the radio to the default settings listed in Table 51 and in Table 66 on page 342.

Table 51 Radio-Specific Parameters

Parameter	Default Value		Description
channel	„	802.11b — 6	Number of the channel in
	„	802.11a — Lowest	which a radio transmits and
			receives traffic
		valid channel number
		for the country of
		operation
tx-power	Highest setting allowed for		Transmit power of a radio, in
	the country of operation		decibels referred to
	or highest setting		1 milliwatt (dBm)
	supported on the
	hardware, whichever is
	lower.

antennatype	internal
	(The default for model
	MAP-262 is ANT1060.)

External antenna model

Note: This parameter applies only to MAPs that support external antennas.

Access — Enabled

History —Introduced in MSS Version 3.0.

Usage — When you clear a radio, MSS performs the following actions:

„Clears the transmit power, channel, and external antenna setting from the radio.

„Removes the radio from its radio profile and places the radio in the default radio profile.

This command does not affect the PoE setting.

Examples — The following command disables and resets radio 2 on the MAP access point connected to port 3:

WX1200# clear ap 3 radio 2