HP Manager Software manual Clear radius

464CHAPTER 14: RADIUS AND SERVER GROUP COMMANDS

clear radius	Resets parameters that were globally configured for RADIUS servers to
	their default values.
	Syntax — clear radius {deadtime key retransmit
	timeout }
	„ deadtime — Number of minutes to wait after declaring an
	unresponsive RADIUS server unavailable before retrying the RADIUS
	server.
	„ key — Password (shared secret key) used to authenticate to the
	RADIUS server.
	„ retransmit — Number of transmission attempts made before
	declaring an unresponsive RADIUS server unavailable.
	„ timeout — Number of seconds to wait for the RADIUS server to
	respond before retransmitting.

Defaults — Global RADIUS parameters have the following default values:

„deadtime—0 (zero) minutes (The WX switch does not designate unresponsive RADIUS servers as unavailable.)

„key—No key

„retransmit—3 (the total number of attempts, including the first attempt)

„timeout—5 seconds

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — To override the globally set values on a particular RADIUS server, use the set radius server command.

Examples — To reset all global RADIUS parameters to their factory defaults, type the following commands:

WX4400# clear radius deadtime success: change accepted. WX4400# clear radius key success: change accepted. WX4400# clear radius retransmit success: change accepted.