HP Manager Software manual Save trace, Set trace, Authentication

564CHAPTER 19: TRACE COMMANDS

save trace	Saves the accumulated trace data for enabled traces to a file in the WX
	switch’s nonvolatile storage.
	Syntax — save trace filename
	„ filename — Name for the trace file. To save the file in a subdirectory,
	specify the subdirectory name, then a slash. For example: traces/trace1
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — To save trace data into the file trace1 in the subdirectory
	traces, type the following command:
	WX4400# save trace traces/trace1
set trace	Traces authentication information.
authentication	Syntax — set trace authentication [mac-addr mac-address]
	[port port-num] [user username] [level level]
	„ mac-addrmac-address— Traces a MAC address. Specify a MAC
	address, using colons to separate the octets (for example,
	00:11:22:aa:bb:cc).
	„ port port-num— Traces on a WX port number.
	„ user username — Traces a user. Specify a username of up to
	32 alphanumeric characters with no spaces.
	„ level level — Determines the quantity of information included in
	the output. You can set the level with an integer from 1 to 10, where
	level 10 provides the most information. Levels 1 through 5 provide
	user-readable information. If you do not specify a level, level 5 is the
	default.
	Defaults — The default trace level is 5.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.