HP Manager Software Traceroute, See Also „ clear sessions on „ display sessions on, Defaults

196CHAPTER 6: IP SERVICES COMMANDS

3	red	Up	Up	5
10	backbone	Up	Up	5	none	Up
				1
				2	none	Up

When the administrator presses Ctrl+t to end the Telnet connection, the management session returns to the local prompt:

WX1200-remote>Session 0 pty tty2.d terminated tt name tty2.d

WX1200#

See Also

„clear sessions on page 497

„display sessions on page 500

traceroute Traces the route to an IP host.

Syntax — traceroute host [dnf] [no-dns] [port port-num] [queries num] [size size] [ttl hops] [wait ms]

„host — IP address, hostname, or alias of the destination host. Specify the IP address in dotted decimal notation.

„dnf — Sets the Do Not Fragment bit in the ping packet to prevent the packet from being fragmented.

„no-dns— Prevents MSS from performing a DNS lookup for each hop to the destination host.

„port port-num— TCP port number listening for the traceroute probes.

„queries num — Number of probes per hop.

„size size — Probe packet size in bytes. You can specify from 40 through 1,460.

„ttl hops — Maximum number of hops, which can be from 1 through 255.

„wait ms — Probe wait in milliseconds. You can specify from 1 through 100,000.

Defaults

„dnf — Disabled