HP Manager Software manual Describes the fields in the display, See Also „ display roaming vlan on

display roaming station 103

Table 21 describes the fields in the display.

Table 21 Output for display roaming station

Field	Description
User Name	Name of the user. This is the name used for authentication. The
	name resides in a RADIUS server database or the local user
	database on a wireless LAN switch.
Station IP Addr	IP address of the user WX switch.
Old AP MAC	MAC address of the access point from which the station is
	roaming or attempting to roam.
	Note: This field is applicable only for clients that reassociate with
	this WX switch from another WX switch.
VLAN	Name of the VLAN to which the RADIUS server or WX switch
	local user database assigned the user.
State	State of the session:
	„ Setup — Station is attempting to roam to this WX switch.
	This switch has asked the WX from which the station is
	roaming for the station’s session information and is waiting
	for a reply.
	„ Up — MSS has established a tunnel between the WX switches
	and the station has successfully roamed to this WX over the
	tunnel.
	„ Chck — This WX switch is in the process of accepting a
	reassociation request from the roaming peer WX switch for a
	station currently roaming to the peer switch.
	„ TChck — This WX switch is in the process of accepting a
	reassociation request from the roaming peer WX switch for a
	station currently roaming to this switch.
	„ WInd — This WX switch is waiting for network congestion to
	clear before sending the roaming indication to the roaming
	peer WX switch.
	„ WResp — This WX switch is waiting for network congestion
	to clear before sending the roaming response to the roaming
	peer WX switch.

See Also

„display roaming vlan on page 104