HP Manager Software manual Portpri, Portvlancost, „ clear spantree portvlanpri on

— List of ports. The port cost is reset on the specified

	clear spantree portpri 373
clear spantree	Resets to the default value the priority of a network port or ports for
portpri	selection as part of the path to the STP root bridge in all VLANs on a
	wireless LAN switch or controller.
	Syntax — clear spantree portpri port-list
	„ port-list— List of ports. The port priority is reset to 32 (the default)
	on the specified ports.
	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — This command resets the priority in all VLANs. To reset the
	priority for only specific VLANs, use the clear spantree portvlanpri
	command.
	Examples — The following command resets the STP priority on port 6 to
	the default:
	WX1200# clear spantree portpri 6
	success: change accepted.
	See Also
	„ clear spantree portvlanpri on page 374
	„ display spantree on page 376
	„ set spantree portpri on page 394
	„ set spantree portvlanpri on page 396
clear spantree	Resets to the default value the cost of a network port or ports on paths to
portvlancost	the STP root bridge for a specific VLAN on a wireless LAN switch, or for all
	VLANs.
	Syntax — clear spantree portvlancost port-list{all vlan
	vlan-id}

„

„

port-list ports.

all — Resets the cost for all VLANs.